biocache-hubs customizations
Hi all, I have two questions: First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip? and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub? Thanks so muchh!!! Kind regards, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
Hi Santi! *First Question:* If you only need to change these names, you can use the i18n. For example: * _advanced.gsp file: * <td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td> *i18n/messages.properties file:* advancedsearch.table06col02.title = Estado/Território *Second Question:* You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/. You need to include the biocache-hubs project location and comment the runtime configuration. grails.plugin.location.'biocache-hubs' = "../biocache-hubs" //runtime ":biocache-hubs:0.57" Hope this helps, Cheers, -- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br daniel.lins@gmail.com 2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es>:
Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
--------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Thanks Daniel, In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right? Thanks in advance, Santi --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Hi Santi! First Question: If you only need to change these names, you can use the i18n. For example: _advanced.gsp file: <td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td> i18n/messages.properties file: advancedsearch.table06col02.title = Estado/Território Second Question: You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/. You need to include the biocache-hubs project location and comment the runtime configuration. grails.plugin.location.'biocache-hubs' = "../biocache-hubs" //runtime ":biocache-hubs:0.57" Hope this helps, Cheers, -- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com> 2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all, I have two questions: First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip? and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub? Thanks so muchh!!! Kind regards, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Ok Dave , Then, If I understood you well, If I create /data/biocache/stateProvinces.txt, the biocache process will use this file. Is this right? Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 8:49 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
I'm testing it, and yes, I understood you very well xD. Thansk Dave. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 8:51 Para: David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Ok Dave , Then, If I understood you well, If I create /data/biocache/stateProvinces.txt, the biocache process will use this file. Is this right? Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 8:49 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Hi Dave, One question more, Here http://datos.gbif.es/generic-hub/search#tab_advanceSearch, we can filter the information by Country and State or Territory. I've included the stateProvinces.txt in the directory /data/biocache/vocab/stateProvinces.txt that you specified me, and my 'ProcessRecords' procedure detects it: 2014-09-26 07:32:51,652 INFO : [Vocab] - Reading vocab file: /data/biocache/vocab/stateProvinces.txt , but when I go to tab_advanceSearch in my generic-hub, I see that my list of State/Territory is again the list of States/Territories of Australia. Do I have to change something else?? Kind regards, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 9:29 Para: Santiago Martinez de la Riva; David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations I'm testing it, and yes, I understood you very well xD. Thansk Dave. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 8:51 Para: David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Ok Dave , Then, If I understood you well, If I create /data/biocache/stateProvinces.txt, the biocache process will use this file. Is this right? Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 8:49 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Have you re-indexed? ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 17:57 To: Martin, Dave (NRCA, Black Mountain) Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, One question more, Here http://datos.gbif.es/generic-hub/search#tab_advanceSearch, we can filter the information by Country and State or Territory. I've included the stateProvinces.txt in the directory /data/biocache/vocab/stateProvinces.txt that you specified me, and my 'ProcessRecords' procedure detects it: 2014-09-26 07:32:51,652 INFO : [Vocab] - Reading vocab file: /data/biocache/vocab/stateProvinces.txt , but when I go to tab_advanceSearch in my generic-hub, I see that my list of State/Territory is again the list of States/Territories of Australia. Do I have to change something else?? Kind regards, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 9:29 Para: Santiago Martinez de la Riva; David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations I'm testing it, and yes, I understood you very well xD. Thansk Dave. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 8:51 Para: David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Ok Dave , Then, If I understood you well, If I create /data/biocache/stateProvinces.txt, the biocache process will use this file. Is this right? Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 8:49 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Yes, I did it,but only for some resources. Or do I have to execute a global command of biocache for all of my resources?? something like: biocache > reindexing. But I think that my server won't be able to re-index all of my resources in only once. :$. Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 10:32 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Have you re-indexed? ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 17:57 To: Martin, Dave (NRCA, Black Mountain) Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, One question more, Here http://datos.gbif.es/generic-hub/search#tab_advanceSearch, we can filter the information by Country and State or Territory. I've included the stateProvinces.txt in the directory /data/biocache/vocab/stateProvinces.txt that you specified me, and my 'ProcessRecords' procedure detects it: 2014-09-26 07:32:51,652 INFO : [Vocab] - Reading vocab file: /data/biocache/vocab/stateProvinces.txt , but when I go to tab_advanceSearch in my generic-hub, I see that my list of State/Territory is again the list of States/Territories of Australia. Do I have to change something else?? Kind regards, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 9:29 Para: Santiago Martinez de la Riva; David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations I'm testing it, and yes, I understood you very well xD. Thansk Dave. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 8:51 Para: David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Ok Dave , Then, If I understood you well, If I create /data/biocache/stateProvinces.txt, the biocache process will use this file. Is this right? Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 8:49 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
Hi Dave, I referred to this part of the code of biocache-hubs: <tr> <td class="labels"><g:message code="advancedsearch.table06col01.title" default="Country"/></td> <td> <select class="country" name="country" id="country"> <option value=""><g:message code="advancedsearch.table06col01.option.label" default="-- select a country --"/></option> <g:each var="country" in="${request.getAttribute(FacetsName.COUNTRIES.fieldname)}"> <option value="${country.key}">${country.value}</option> </g:each> </select> </td> </tr> <tr> <td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td> <td> <select class="state" name="state" id="state"> <option value=""><g:message code="advancedsearch.table06col02.option.label" default="-- select a state/territory --"/></option> <g:each var="state" in="${request.getAttribute(FacetsName.STATES.fieldname)}"> <option value="${state.key}">${state.value}</option> </g:each> </select> </td> </tr> For explame, in this line: <g:each var="state" in="${request.getAttribute(FacetsName.STATES.fieldname)}">, where can I see the list of the states that the application is reading??? and in this way I can customize my own list of states. Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: Santiago Martinez de la Riva Enviado el: viernes, 26 de septiembre de 2014 8:51 Para: David.Martin@csiro.au; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Ok Dave , Then, If I understood you well, If I create /data/biocache/stateProvinces.txt, the biocache process will use this file. Is this right? Cheers, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 8:49 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: RE: [Ala-portal] biocache-hubs customizations Thanks Santi You wont have. By default the biocache uses the files packaged in the executable. It checks the directory for any files that should be used instead. Dave ________________________________________ From: Santiago Martinez de la Riva [sama@gbif.es] Sent: 26 September 2014 16:36 To: Martin, Dave (NRCA, Black Mountain); daniel.lins@gmail.com Cc: ala-portal@lists.gbif.org Subject: RE: [Ala-portal] biocache-hubs customizations Hi Dave, I don't have this directory/file in my system: /data/biocache/vocab/statePorvinces.txt. I have realized that other files are refered when the process records procedure is executed, e.g: 2014-09-25 20:29:45,316 INFO : [Vocab] - Reading internal vocab file: /kingdoms.txt 2014-09-25 20:29:49,946 INFO : [Vocab] - Reading internal vocab file: /basisOfRecord.txt Also I would like to customize the vocab of basis of record, but Should be these files in the same directory, /data/biocache/vocab which I don't have in my server :$?? Thanks in advance, Santi. --------------------------------------------------------------------------------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es ________________________________________ De: David.Martin@csiro.au [David.Martin@csiro.au] Enviado el: viernes, 26 de septiembre de 2014 4:48 Para: Santiago Martinez de la Riva; daniel.lins@gmail.com CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations Thanks Santiago, Daniel. I thought I should add that state/territory values are added during the processing. You¹ve probably noticed they are only limited to Australian states. Theres two ways the stateProvince values are added: 1) Intersection with a polygon layer. 2) Matching the stateProvince value supplied in the raw record. For 1), theres still work to be done for the ala-demo to package up more of the GIS components to enable support for sampling. So for now 2) is the only option. To do this you can override the vocabulary file by including your own version here: /data/biocache/vocab/stateProvinces.txt The format of these files is tab separated like so: Canonical form, variant1, variant2, variant3 E.g. New South Wales, NSW, N. South Wales To pick up changes to vocab files, you¹ll need to: 1) change the files 2) re-process 3) re-index Hope this helps. Dave On 25/09/2014 10:26 pm, "Santiago Martinez de la Riva" <sama@gbif.es> wrote:
Thanks Daniel,
In the first part I don't refer to title, I refer to list of Facet names, that for the case of State/Territory, are: New South Wales, Victoria, Queensland, South Australia....and more, how can I customize this list? In the second point, I understand that I can locate the biocache-hub locally, and only I have to indicate the path in the BuildConfig.groovy file. Is it right?
Thanks in advance, Santi
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES, Unidad de Coordinación Tel. +34 91 4203017 x 273 Real Jardín Botánico - CSIC Fax +34 91 429 2405 Plaza de Murillo, 2 sama@gbif.es 28014 Madrid, Spain www.gbif.es
________________________________________ De: Daniel Lins [daniel.lins@gmail.com] Enviado el: jueves, 25 de septiembre de 2014 13:16 Para: Santiago Martinez de la Riva CC: ala-portal@lists.gbif.org Asunto: Re: [Ala-portal] biocache-hubs customizations
Hi Santi!
First Question:
If you only need to change these names, you can use the i18n. For example:
_advanced.gsp file:
<td class="labels"><g:message code="advancedsearch.table06col02.title" default="State/Territory"/></td>
i18n/messages.properties file:
advancedsearch.table06col02.title = Estado/Território
Second Question:
You can change your BuildConfig.groovy file, in generic-hub/grails-app/conf/.
You need to include the biocache-hubs project location and comment the runtime configuration.
grails.plugin.location.'biocache-hubs' = "../biocache-hubs"
//runtime ":biocache-hubs:0.57"
Hope this helps,
Cheers,
-- Daniel Lins da Silva (Mobile) 55 11 96144-4050 Research Center on Biodiversity and Computing (Biocomp) University of Sao Paulo, Brazil daniellins@usp.br<mailto:daniellins@usp.br> daniel.lins@gmail.com<mailto:daniel.lins@gmail.com>
2014-09-25 7:41 GMT-03:00 Santiago Martinez de la Riva <sama@gbif.es<mailto:sama@gbif.es>>: Hi all,
I have two questions:
First: I want to change some FacetNames such as State/Territory, Local Govt. Area in the _advanced.gsp, but I don't know where is located this information. Could you give some tip?
and second: If I modify the biocache-hub plug-in how can i do that generic-hub uses my new biocache-hub?
Thanks so muchh!!! Kind regards, Santi.
-------------------------------------------------------------------------- ------------- Santiago Martínez de la Riva GBIF.ES<http://GBIF.ES>, Unidad de Coordinación Tel. +34 91 4203017 x 273<tel:%2B34%2091%204203017%20x%20273> Real Jardín Botánico - CSIC Fax +34 91 429 2405<tel:%2B34%2091%20429%202405> Plaza de Murillo, 2 sama@gbif.es<mailto:sama@gbif.es> 28014 Madrid, Spain www.gbif.es<http://www.gbif.es> _______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org<mailto:Ala-portal@lists.gbif.org> http://lists.gbif.org/mailman/listinfo/ala-portal
_______________________________________________ Ala-portal mailing list Ala-portal@lists.gbif.org http://lists.gbif.org/mailman/listinfo/ala-portal
partisipan (3)
-
Daniel Lins -
David.Martin＠csiro.au -
Santiago Martinez de la Riva